6000 Hz Test Tone (6 kHz)

Play a pure 6 kHz tone - the top edge of the presence band, the lower edge of sibilance, and one of the frequencies on a standard workplace hearing check. This page plays the tone; it does not test your hearing.

6000Hz
Volume50%
Waveform
Download 6000 Hz tone

Sine wave, mono, 16-bit 44.1 kHz WAV or 192 kbps MP3 at -6 dBFS with 20 ms fades. The volume slider does not change the file.

Why 6 kHz is on workplace hearing checks

In the US, OSHA's occupational noise standard (29 CFR 1910.95) requires workplace audiograms to cover at least 500, 1000, 2000, 3000, 4000 and 6000 Hz in each ear. 6 kHz earns its place because noise damage tends to show up first somewhere between 3 and 6 kHz, classically as a dip at 4 kHz. Testing at 6 kHz, and often 8 kHz, shows whether hearing recovers above that dip - the shape that sets a noise notch apart from the steady downward slope of aging.

Playing a tone in a browser is not a hearing test. Your headphones, the volume setting and the room all change what you hear, and nothing here is calibrated. The hearing test on this site checks how high you can hear (8 to 20 kHz), which is a different question from an audiogram. A real audiogram comes from an audiologist or an occupational hearing program.

6 kHz in a mix

The hiss of an "s" carries most of its energy between about 5 and 8 kHz, and 6 kHz is often where a bright vocal mic or an eager EQ boost makes it sting. A de-esser is a compressor that listens to this band only and pulls the vocal down for the length of each "s".

Play this tone and then a harsh vocal recording, and the connection is easy to hear: the edge on the "s" sounds lives right here. Hi-hats and cymbals carry plenty of energy at 6 kHz too, so a broad EQ cut to fix a vocal can dull the drums along with it. A narrow cut, or a de-esser on the vocal alone, does less collateral damage.

The tone itself

6000 Hz falls about 23 cents above F#8 (5920 Hz), a note beyond the reach of the piano and the orchestra. Heard on its own it is a thin, bright whistle - clearly higher than 4 kHz, yet still more of a pitch than the faint hiss you get from 12 kHz upward.

Almost every speaker and pair of headphones reproduces 6 kHz without trouble, so silence here usually means a muted channel, a disconnected tweeter or a volume set to nothing. Bring the level up slowly; like its neighbors at 4 and 5 kHz, this tone sounds loud for the energy behind it.

6000 Hz FAQ

What does 6000 Hz sound like?

A sharp, high whistle with a slight hiss around it, close to where the "s" in speech gets its edge. It is higher than anything on a piano but still reads as a clear pitch.

Why is 6 kHz on a hearing test?

Because noise damage tends to appear between 3 and 6 kHz. US workplace hearing programs must test 6 kHz along with 500 Hz to 4 kHz under OSHA 29 CFR 1910.95, and clinical audiograms commonly include it alongside 8 kHz. Together those points show whether a dip around 4 kHz recovers higher up.

What is 6 kHz in a mix?

The sibilance and edge region: "s" sounds, consonant crispness, the sizzle of hi-hats and cymbals. A boost adds definition and bite; too much makes vocals spit. If a vocal is harsh only on its "s" sounds, a de-esser is usually a better fix than an EQ cut.

What note is 6000 Hz?

About 23 cents above F#8 (5920 Hz) with A4 at 440 Hz - not quite a quarter of the way to G8 (6272 Hz). It sits above the top of the piano (C8, 4186 Hz), so in music it turns up as overtones rather than as a played note.