G♯3 / A♭3 · 207.65 Hz

G♯3 is piano key 36 of 88 and MIDI note 56 - the low-mid register, around a male speaking and singing voice. Play the pure tone below, tune to it, or explore the note in every octave.

207.65Hz
Volume50%
Waveform
Download 207.65 Hz tone

Sine wave, mono, 16-bit 44.1 kHz WAV or 192 kbps MP3 at -6 dBFS with 20 ms fades. The volume slider does not change the file.

G♯3 on the staff and the piano

On the bass clef, G♯3 sits in the fourth space from the bottom. The sharp sign raises G3 by one semitone. The same key can also be written A♭3, with a flat on the next line or space up.

On the piano, G♯3 is key 36 of 88, octave 3 - the black key between G3 and A3. It is 4 semitones below middle C (C4, key 40).

G♯3

Play it on the online piano, or see all 88 note frequencies on one page.

G♯3 at a glance

Frequency
207.65 Hz
Wavelength (in air)
1.65 m
MIDI note
56
Piano key
36 / 88
Octave
3
Enharmonic
A♭3

All values assume twelve-tone equal temperament at the international standard pitch of A4 = 440 Hz. In that system every semitone has the same size - a frequency ratio of 2^(1/12) - so G♯3 is exactly 440 × 2^(-13/12) Hz. Under alternative references the note shifts with the reference: at A4 = 432 Hz, G♯3 becomes 203.88 Hz.

G♯ in every octave

NoteFrequencyMIDIPiano key
G♯151.91 Hz3212
G♯2103.83 Hz4424
G♯3 ←207.65 Hz5636
G♯4415.30 Hz6848
G♯5830.61 Hz8060
G♯61661.2 Hz9272
G♯73322.4 Hz10484

Each octave doubles the frequency - the simplest relationship in music, and the reason notes an octave apart sound like “the same note, higher”.

Who plays G♯3

G♯3 is within the usual range of the piano, guitar, bass guitar, violin, viola, cello, double bass, clarinet, trumpet and trombone. Among voice types it falls in the usual range of alto, tenor, baritone and bass.

Instruments
  • Piano: A0–C8
  • Guitar (standard tuning): E2–E6
  • Bass guitar (4-string): E1–G4
  • Violin: G3–A7
  • Viola: C3–E6
  • Cello: C2–A5
  • Double bass: E1–G4
  • Clarinet (B♭): D3–B♭6
  • Trumpet (B♭): E3–B♭5
  • Trombone (tenor): E2–F5
Voices
  • Alto (contralto): F3–F5
  • Tenor: C3–C5
  • Baritone: A2–A4
  • Bass voice: E2–E4

Ranges are approximate: they are the commonly cited sounding (concert) pitches, and real ranges vary by player, instrument, tuning and repertoire. Guitar, bass guitar and double bass are written an octave higher than they sound; B♭ clarinet and trumpet are written a whole tone higher.

Neighboring notes

One semitone down is G3 at 196.00 Hz; one semitone up is A3 at 220.00 Hz. Need a frequency between notes, or a different waveform? The tone generator plays anything from 20 Hz to 20 kHz; the note ↔ frequency converter does the math both directions, and the chromatic tuner listens to your instrument and shows the offset in cents.

G♯3 FAQ

What frequency is G♯3?

G♯3 / A♭3 is 207.65 Hz in twelve-tone equal temperament with the standard reference of A4 = 440 Hz. Every semitone step multiplies the frequency by the twelfth root of two (about 1.0595), and G♯3 sits 13 semitones below A4.

What MIDI number and piano key is G♯3?

G♯3 is MIDI note 56 and key 36 of 88 on a standard piano. Octave numbering follows scientific pitch notation, where middle C is C4 (MIDI 60).

Where is G♯3 on the piano and the staff?

G♯3 / A♭3 is key 36 of 88 on a standard piano, in octave 3, on the black key between G3 and A3, 4 semitones below middle C. On the bass clef staff it sits in the fourth space from the bottom, written with a sharp sign (or as A♭3 with a flat one position higher).

How do I tune to G♯3?

Play the tone above and match your instrument by ear until the beating between the two pitches slows and disappears, or use the chromatic tuner with your microphone for a cents readout. Small mistunings show up as slow beats: one beat per second at this pitch means you are about 8.3 cents off.